60W 12V TRIAC Dimmable LED Driver (LP-60-12PT)

Excluding VAT
  • Sale
  • Regular price £52.60
Shipping calculated at checkout.

✓ Free UK delivery on orders over £75 ex VAT (excluding aluminium profiles)

Complete your installation

You may also need: not sure? Plan your whole project →

Supply cableSized to suit the current of your runView range →Smart controlsReceiver and remote or wall controller to dim and switchView range →Aluminium profileFor a neat, diffused, professional finishView range →

60W12V DC constant voltage200–240V AC inputTRIAC dimmable3-year warranty

The LP-60-12PT is a 60W, 12V constant voltage LED driver (power supply) for 12V LED strip, dimmable with standard leading and trailing edge TRIAC mains dimmers. At a safe 80% load it powers up to 6.6m of 7.2W/m strip. Price £52.60 ex VAT (£63.12 inc VAT), with a 3-year warranty.

  • Matched to our 12V LED strip ranges
  • Short circuit and overload protection
  • Fast UK dispatch
  • Not sure which size? Call our technical team

Why choose a TRIAC dimmable driver?

A TRIAC dimmable driver lets you dim LED strip from a standard mains wall dimmer – the same type used for downlights – with no extra controller or receiver. The LP-60-12PT works with both leading and trailing edge dimmers and gives smooth, flicker-free PWM dimming.

Specifications

Part numberLP-60-12PT
Output power60W
Output voltage12V DC (constant voltage)
Output current5A
Input voltage200–240V AC
DimmingLeading and trailing edge TRIAC dimmers (PWM output)
LocationIndoor use
Efficiency85%
ProtectionsShort circuit, overload, over current, over temperature
Dimensions178 × 61 × 24mm
Operating temperature-40°C to +70°C
Warranty3 years

How much LED strip can it power?

Load the driver to no more than 80% of its rating. Add up all strips connected to it.

Strip powerMaximum strip length (80% load)
4.8W/mUp to 10m
7.2W/mUp to 6.6m
9.6W/mUp to 5m
14.4W/mUp to 3.3m

Where to use it

  • Kitchens and living rooms with wall dimmers
  • Bedrooms and hallways
  • Hotels, restaurants and bars
  • Offices and meeting rooms
  • Retrofits using existing dimmer switches
  • Any 12V strip needing mains dimming

Installation

Mains wiring should be carried out by a qualified electrician. Install the driver in a dry, ventilated location – not in insulation or sealed voids. Keep the low-voltage cable run to the strip as short as practical and size the cable for the current (0.5mm² up to 3A · 0.75mm² up to 6A · 1.0mm² up to 8A).

Frequently asked questions

How many metres of LED strip can a 60W driver power?

At 80% load it powers up to 6.6m of 7.2W/m strip, or 3.3m of 14.4W/m strip. Multiply the strip length by its watts per metre and keep the total below 48W.

Can I use it with 12V and 24V strip?

No. This is a 12V driver and must only be used with 12V LED strip. Using the wrong voltage will damage the strip or give very dim light.

Can I dim LED strip with this driver?

Yes. Connect it to a standard leading or trailing edge TRIAC wall dimmer on the mains side for smooth dimming.

Can I install it outdoors?

No. It is designed for indoor, dry locations. For outdoor use choose one of our IP66 TRIAC dimmable drivers.

Can I connect several strips to one driver?

Yes, as long as the total wattage of all the strips stays below 80% of the driver's rating. Wire each strip back to the driver rather than daisy-chaining long runs.

What warranty does it have?

3 years.

Complete your installation

Expert UK support

Leading L.E.D Ltd supplies domestic and commercial grade LED strip, drivers and controllers to installers, electricians and homeowners across the UK. Not sure which driver you need? Our technical team is here to help.

📞 02476 262 328 ✉ sales@leadingled.co.uk 💬 Connect with us on WhatsApp

Request a quote →

The 60W 12V TRIAC Dimmable LED Driver (LP-60-12PT) is far and away, one of our most popular items. People can't seem to get enough of it.

Inventory Last Updated: Nov 20, 2026