24V Splash-proof IP55 LED Strip – Warm White 3000K, 10W/m (Leading24-Splash-98)

Excluding VAT
  • Sale
  • Regular price £8.00
Shipping calculated at checkout.

✓ Free UK delivery on orders over £75 ex VAT (excluding aluminium profiles)
✓ Cut-to-measure strip with soldered tails: 1–3 business days
⚠ LED drivers (power supplies) are IP20 – indoor use only. If the driver will be in a damp or wet area, it must be installed in a suitable waterproof housing.

Complete your installation

You may also need: not sure? Plan your whole project →

Cut & soldered to measureWe cut your strip and solder the cable tailsView range →LED driver (power supply)Use our calculator to pick the right sizeView range →Aluminium profileFor a neat, diffused, professional finishView range →Smart controlsReceiver and remote or wall controller to dim and switchView range →

3000K warm white1,285 lm/m98 LEDs/mIP55 splash-proofCut every 71.4mmDimmable

The Leading24-Splash-98 is a 24V IP55 LED strip in warm white (3000K). It delivers 1,285 lumens per metre at 10W/m, can be cut every 71.4mm and is fully dimmable. Sold per metre from £8.00 ex VAT (£9.60 inc VAT).

  • Priced per metre – up to 5m ships as one continuous length
  • Max run 5m from one end
  • Cut-to-measure with soldered tails available
  • UK technical support by phone or WhatsApp

Why choose a splash-proof IP55 LED strip?

IP55 strip has a protective coating that guards against dust and water jets, so it can be used where splashes and condensation are likely – kitchens, bathrooms (outside wet zones), utility rooms and covered outdoor areas. The Leading24-Splash-98 uses 98 LEDs per metre for a bright, even line of light – 1,285 lumens per metre.

Specifications

Part numberLS24-98-WW-IP55
Colour3000K warm white
Light output1,285 lumens per metre
Power10W per metre
Voltage24V DC constant voltage
LED density98 LEDs per metre
Strip width8mm
Cut pointsEvery 71.4mm
Maximum run5m from one end
IP ratingIP55 (splash-proof)
DimmingDimmable with wireless smart controllers or a TRIAC mains dimmable driver
BackingHeavy-duty 3M adhesive
CRIHigh – accurate colour rendering
LifespanUp to 50,000 hours

Where to use it

  • Kitchens – under cabinets and splashbacks
  • Bathrooms and en-suites outside wet zones
  • Utility rooms and laundry areas
  • Covered outdoor areas and porches
  • Commercial kitchens and bars
  • Anywhere splashes or condensation are likely

Installation

Installation is simple and designed for a secure, long-lasting fit. The high-bond adhesive backing grips firmly on clean, dry surfaces. For the best finish and heat management, house the strip in an aluminium profile with a diffuser. Use a 24V constant voltage LED driver.

What size driver do I need?

Choose a 24V driver so the strip uses no more than 80% of its rated power. Add up the total length of all strips sharing one driver.

DriverMaximum strip length @ 10W/m
20W – 24VUp to 1.6m
30W – 24VUp to 2.4m
40W – 24VUp to 3.2m
50W – 24VUp to 4m
75W – 24VUp to 5m (max run)

Working out your load: 5m × 10W/m = 50W. 50W ÷ 24V = 2.08A. Cable: 0.5mm² up to 3A · 0.75mm² up to 6A · 1.0mm² up to 8A.

Shop 24V drivers →

How it is supplied

  • Priced per metre. Orders up to 5 metres are dispatched as one continuous, uncut length unless you specify otherwise.
  • Orders longer than 5 metres are dispatched in 5m reels, each powered separately, unless you specify otherwise.
  • Need specific lengths? Order cut-to-measure strip with soldered tails, or add your lengths and tail details in the special instructions box at checkout.
  • Runs over 5m? Contact us and we'll help you plan the best setup.
Made-to-measure LED strip cut to length with soldered tails

Frequently asked questions

How bright is this strip?

It produces 1,285 lumens per metre at 10W per metre.

What size driver do I need for 5 metres?

5m at 10W/m is a 50W load, so choose a 24V driver rated at least 63W. See the driver table above.

Can I dim it with a wall dimmer?

Yes. It dims with TRIAC mains wall dimmers (leading or trailing edge) when used with a TRIAC-dimmable driver, or with our wireless smart controllers.

How long can a single run be?

Up to 5m when powered from one end. For longer runs, use additional power feeds.

Can I cut the strip to size?

Yes, every 71.4mm.

Is it priced per metre?

Yes. Add as many metres as you need to your cart – from £8.00 per metre ex VAT.

Will my order come as one length?

Yes – orders up to 5 metres are dispatched as one continuous length unless you specify otherwise. For bespoke lengths with soldered tails, choose the custom length option or contact us.

Can I use it outdoors or in a bathroom?

It is IP55 splash-proof, so it suits kitchens, bathrooms outside wet zones and covered outdoor areas. For full outdoor exposure or immersion, choose IP67.

Complete your installation

Expert UK support

Leading L.E.D Ltd supplies domestic and commercial grade LED strip to installers, electricians and homeowners across the UK. Not sure which driver, profile or controller you need? Our technical team is here to help.

📞 02476 262 328 ✉ sales@leadingled.co.uk 💬 Connect with us on WhatsApp

Request a quote →

The 24V Splash-proof IP55 LED Strip – Warm White 3000K, 10W/m (Leading24-Splash-98) is far and away, one of our most popular items. People can't seem to get enough of it.

Inventory Last Updated: Nov 20, 2026