24V Splash-proof RGBW LED Strip IP65 – RGB + Natural White, 11W/m (Leading24-Splash-RGBW)

Excluding VAT
  • Sale
  • Regular price £15.00
Shipping calculated at checkout.

★★★★★Rated 5.0/5 from 1 review – read reviews
✓ Free UK delivery on orders over £75 ex VAT (excluding aluminium profiles)
✓ Cut-to-measure strip with soldered tails: 1–3 business days
⚠ LED drivers (power supplies) are IP20 – indoor use only. If the driver will be in a damp or wet area, it must be installed in a suitable waterproof housing.

Complete your installation

You may also need: not sure? Plan your whole project →

RGBW colour controlsReceiver and controller to mix colours and set scenesView range →5-core cableTo connect RGBW strip to its receiverView range →LED driver (power supply)Use our calculator to pick the right sizeView range →Aluminium profileFor a neat, diffused, professional finishView range →

RGBW11W/mRGB + whiteIP65 splash-proofDimmable

The Leading24-Splash-RGBW is a 24V RGBW colour-changing LED strip combining full RGB colour with a dedicated natural white channel. It delivers 11W per metre and is fully dimmable. Sold per metre from £15.00 ex VAT (£18.00 inc VAT).

  • Priced per metre – up to 15m ships as one continuous length
  • Max run 15m from one end
  • Cut-to-measure with soldered tails available
  • UK technical support by phone or WhatsApp

Why choose RGBW strip?

RGB strip can only mix white from red, green and blue, which looks bluish. RGBW adds a dedicated natural white channel, so you get vivid colours for parties and scenes plus a clean, usable white for everyday lighting – all from one strip.

Specifications

Part numberLS24-60-11/RGBW-NW-IP65
ColourRGB + natural white 4000K
Power11W per metre
Voltage24V DC constant voltage
LED density60 LEDs per metre
Strip width12mm
Maximum run15m from one end
IP ratingIP65 (splash-proof – protected against water jets)
DimmingColour, white and brightness via an RGBW controller
BackingHeavy-duty 3M adhesive
CRIHigh – accurate colour rendering
LifespanUp to 50,000 hours

Where to use it

  • Kitchens – under cabinets and splashbacks
  • Bathrooms and en-suites outside wet zones
  • Utility rooms and laundry areas
  • Covered outdoor areas and porches
  • Commercial kitchens and bars
  • Anywhere splashes or condensation are likely

Installation

Installation is simple and designed for a secure, long-lasting fit. The high-bond adhesive backing grips firmly on clean, dry surfaces. For the best finish and heat management, house the strip in an aluminium profile with a diffuser. Use a 24V constant voltage LED driver and a compatible controller.

What size driver do I need?

Choose a 24V driver so the strip uses no more than 80% of its rated power. Add up the total length of all strips sharing one driver.

DriverMaximum strip length @ 11W/m
20W – 24VUp to 1.4m
30W – 24VUp to 2.1m
40W – 24VUp to 2.9m
50W – 24VUp to 3.6m
75W – 24VUp to 5.4m
100W – 24VUp to 7.2m
150W – 24VUp to 10.9m
200W – 24VUp to 14.5m
320W – 24VUp to 15m (max run from one end) – or up to 23m in total across several runs

Working out your load: 15m × 11W/m = 165W. 165W ÷ 24V = 6.9A. Cable: 0.5mm² up to 3A · 0.75mm² up to 6A · 1.0mm² up to 8A.

Please note: our standard LED drivers (power supplies) are IP20 – for indoor use only. If the driver will be in a damp or wet environment, it must be installed in a suitable waterproof housing.

Shop 24V drivers →

How it is supplied

  • Priced per metre. Orders up to 15 metres are dispatched as one continuous, uncut length unless you specify otherwise.
  • Orders longer than 15 metres are dispatched in more than one length, each powered separately, unless you specify otherwise.
  • Need specific lengths? Order cut-to-measure strip with soldered tails, or add your lengths and tail details in the special instructions box at checkout.
  • Runs over 15m? Contact us and we'll help you plan the best setup.
Made-to-measure LED strip cut to length with soldered tails

Frequently asked questions

How bright is this strip?

It uses 11W per metre with 60 LEDs per metre for a bright output. Contact us if you need photometric data.

What size driver do I need for 15 metres?

15m at 11W/m is a 165W load, so choose a 24V driver rated at least 207W – our 320W driver is ideal. See the driver table above.

What controller do I need?

Use an RGBW controller and receiver with a 24V driver. Our wireless wall and handheld controllers let you choose colours, switch to pure white, dim and set scenes.

How long can a single run be?

Up to 15m when powered from one end. For longer runs, use additional power feeds.

Is it priced per metre?

Yes. Add as many metres as you need to your cart – from £15.00 per metre ex VAT.

Will my order come as one length?

Yes – orders up to 15 metres are dispatched as one continuous length unless you specify otherwise. For bespoke lengths with soldered tails, choose the custom length option or contact us.

Can I use it outdoors or in a bathroom?

It is IP65 splash-proof, protected against water jets, so it suits kitchens, bathrooms outside wet zones and covered outdoor areas. For immersion or full outdoor exposure, choose IP67. Please note our standard LED drivers are IP20 – if the driver will be in a damp or wet environment, install it in a suitable waterproof housing.

Complete your installation

Expert UK support

Leading L.E.D Ltd supplies domestic and commercial grade LED strip to installers, electricians and homeowners across the UK. Not sure which driver, profile or controller you need? Our technical team is here to help.

📞 02476 262 328 ✉ sales@leadingled.co.uk 💬 Connect with us on WhatsApp

Request a quote →

The 24V Splash-proof RGBW LED Strip IP65 – RGB + Natural White, 11W/m (Leading24-Splash-RGBW) is a sensational customer favorite, and we hope you like it just as much.

Inventory Last Updated: Nov 20, 2026

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Raj Maan
AMAZING QUALITY

Did not think i would be able to find such heavy duty bright lights at such a affordable price. This has transformed my kitchen!