The LP-360-24PT is a 360W, 24V constant voltage LED driver (power supply) for 24V LED strip, dimmable with standard leading and trailing edge TRIAC mains dimmers, in an IP66 housing suitable for outdoor installation. At a safe 80% load it powers up to 28.8m of 10W/m strip. Price £160.00 ex VAT (£192.00 inc VAT).
- Matched to our 24V LED strip ranges
- Short circuit and overload protection
- Fast UK dispatch
- Not sure which size? Call our technical team
Why choose a TRIAC dimmable driver?
A TRIAC dimmable driver lets you dim LED strip from a standard mains wall dimmer – the same type used for downlights – with no extra controller or receiver. The LP-360-24PT works with both leading and trailing edge dimmers and gives smooth, flicker-free PWM dimming. Its sealed IP66 metal housing means it can be installed outdoors or in damp locations.
Specifications
| Part number | LP-360-24PT |
|---|---|
| Output power | 360W |
| Output voltage | 24V DC (constant voltage) |
| Output current | 15A |
| Input voltage | 200–240V AC |
| Dimming | Leading and trailing edge TRIAC dimmers (PWM output) |
| IP rating | IP66 – suitable for outdoor installation |
| Efficiency | up to 89% |
| Power factor | Built-in active PFC |
| Protections | Short circuit, overload, over current, over temperature |
| Dimensions | 276 × 78 × 47mm |
How much LED strip can it power?
Load the driver to no more than 80% of its rating. Add up all strips connected to it.
| Strip power | Maximum strip length (80% load) |
|---|---|
| 9.6W/m | Up to 30m |
| 10W/m | Up to 28.8m |
| 14.4W/m | Up to 20m |
| 15.3W/m | Up to 18.8m |
| 20W/m | Up to 14.4m |
Where to use it
- Outdoor decking, garden and façade lighting
- Bathrooms and damp locations
- Commercial and hospitality projects
- Kitchens and living spaces with TRIAC wall dimmers
- Larger multi-run installations
- Retrofits using existing dimmer switches
Installation
Mains wiring should be carried out by a qualified electrician. Mount the driver securely with the cable glands facing down. Keep the low-voltage cable run to the strip as short as practical and size the cable for the current (0.5mm² up to 3A · 0.75mm² up to 6A · 1.0mm² up to 8A).
Frequently asked questions
How many metres of LED strip can a 360W driver power?
At 80% load it powers up to 28.8m of 10W/m strip, or 14.4m of 20W/m strip. Multiply the strip length by its watts per metre and keep the total below 288W.
Can I use it with 12V and 24V strip?
No. This is a 24V driver and must only be used with 24V LED strip. Using the wrong voltage will damage the strip or give very dim light.
Can I dim LED strip with this driver?
Yes. Connect it to a standard leading or trailing edge TRIAC wall dimmer on the mains side for smooth dimming.
Can I install it outdoors?
Yes. It has an IP66 rated housing, so it can be installed outdoors or in damp locations.
Can I connect several strips to one driver?
Yes, as long as the total wattage of all the strips stays below 80% of the driver's rating. Wire each strip back to the driver rather than daisy-chaining long runs.
Complete your installation
Expert UK support
Leading L.E.D Ltd supplies domestic and commercial grade LED strip, drivers and controllers to installers, electricians and homeowners across the UK. Not sure which driver you need? Our technical team is here to help.
📞 02476 262 328 ✉ sales@leadingled.co.uk 💬 Connect with us on WhatsApp
Inventory Last Updated: Nov 20, 2026



