
LED strip light specification | ![]() |
|
Pixel chasing LED strip warm white | Colour temperature: Warm white 3000k |
|
Part number | LS24PIX-120-WW5 | |
Brightness level |
Bright. Pixel chasing LED strip. |
|
Recommended installation | Casino, bar, restaurant, gym, sports hall, theatre, signage. Domestic & Commercial areas. | |
IP rating | IP20 | |
Lumen Output | 1029 Lumens /m. | |
Dimmable | Yes. | |
Wattage | 14 w/m. | |
Voltage | 24V. Constant voltage. | |
LED quantity |
120 LEDS /m Pixel: 8 pix/M |
|
Width of strip |
10mm. |
|
Backing tape | Heavy duty 3M. Secure neatly onto clean surface. | |
Maximum linear run length capacity | 5 metres. | |
CRI (Colour rendering Index) | High: Rendering colours more realistically. | |
Lifespan | Up to 50,000 hours. | |
Cut points on the strip | Every 125mm - cut to measure. |
Purchase LED strip lights by the metre & select required quantity. If you need soldered cable tails click on bespoke options below.
NB: When ordering in quantities of 5 - Each 5 metre reel will be dispatched as standard, complete with 2 metre, 2 core soldered tail & protective heat shrink. E.g. 20 metres of strip (select quantity 20) - you will receive this as 4 x 5 metre reels, each reel with 2 metre soldered cable tail and protective heat shrink
For alternative measurements e.g. 3.5 metre pieces of strip, cut to measure & additional customisation (if required), select your quantity and shop bespoke options:
Shop bespoke options here
Shop 5 metre kit here
SUPPORT:
Select compatible power supply (LED driver) based on length of LED strip. (Max run length of strip in one single run 5 metres). | (NB: When sharing a power supply between multiple lengths of LED strip, do not exceed the maximum load of the power supply) |
Up to 1 metre | |
1.5m - Max load 2 metres | |
5m - Max load 5 metres |
Required steps & components to power pixel chasing LED strip:Powering one length.1. Soldered 2 core cable tail when powering one length of Pixel chasing. 2. Plug & Play soldered lead with pixel controller unit when powering one length of Pixel chasing. 3. Wireless wall controller inclusive of pixel controller unit. 4. 24V power supply - chart above. Or: Power multiple lengths.2. Amplifier for pixel chasing LED strip to control multiple lengths. 3. Wireless wall controller inclusive of pixel controller unit (to be wired into amplifier). 4. 24V power supply - chart above. |
House LED strip in profile - Diffusion of light, heat dissipation & professional finish. |
SPECIFICATION:
Priced by the metre for a maximum single run length of 5 metres - (If longer run lengths over 5 metres are required refer to part number: LS24PIX-120-WW20).
LED strip is dispatched as one continuous length as per order quantity -Uncut, unless otherwise stated.
Cut to measure with soldered cable tails - Speak with our team to request a bespoke quotation. Alternatively, leave details and measurements for cut to measure LED strip & required length of soldered cable tails in the special instructions box provided at checkout (remember to select the correct cable & solder operation before completing your order).
Enrich your area with Leading24-Pix5.
Video supplied following installation: Amelia Creations LTD.
Pixel chasing LED strip warm white
Inventory Last Updated: Apr 22, 2025