| LED strip light specification |  |
|
| Pixel chasing LED strip cool white | Colour temperature: Cool white 6000k |
|
| Part number | LS24PIX-120-CW5 | |
| Brightness level |
Bright. Pixel chasing LED strip. |
|
| Recommended installation | Casino, bar, restaurant, gym, sports hall, theatre, signage. Domestic & Commercial areas. | |
| IP rating | IP20 | |
| Lumen Output | 1029 Lumens /m. | |
| Dimmable | Yes. | |
| Wattage | 14 w/m. | |
| Voltage | 24V. Constant voltage. | |
| LED quantity |
120 LEDS /m Pixel: 8 pix/M |
|
| Width of strip |
10mm. |
|
| Backing tape | Heavy duty 3M. Secure neatly onto clean surface. | |
| Maximum linear run length capacity | 5 metres. | |
| CRI (Colour rendering Index) | High: Rendering colours more realistically. | |
| Lifespan | Up to 50,000 hours. | |
| Cut points on the strip | Every 125mm - cut to measure. | |
|
Warranty: 5 years. |
Purchase LED strip lights by the metre & select required quantity. If you need soldered cable tails click on bespoke options below.
NB: When ordering in quantities of 5 - Each 5 metre reel will be dispatched as standard, complete with 2 metre, 2 core soldered tail & protective heat shrink. E.g. 20 metres of strip (select quantity 20) - you will receive this as 4 x 5 metre reels, each reel with 2 metre soldered cable tail and protective heat shrink
For alternative measurements e.g. 3.5 metre pieces of strip, cut to measure & additional customisation (if required), select your quantity and shop bespoke options:
Shop bespoke options here
Shop 5 metre kit here
SUPPORT:
| Select compatible power supply (LED driver) based on length of LED strip. (Max run length of strip in one single run 5 metres). | (NB: When sharing a power supply between multiple lengths of LED strip, do not exceed the maximum load of the power supply) |
| Up to 1 metre | |
| 1.5m - Max load 2 metres | |
| 5m - Max load 5 metres |
|
Required steps & components to power pixel chasing LED strip:Powering one length.1. Soldered 2 core cable tail when powering one length of Pixel chasing.
2. Plug & Play soldered lead with pixel controller unit when powering one length of Pixel chasing.
3. Wireless wall controller inclusive of pixel controller unit. 4. 24V power supply - chart above. |
|
House LED strip in profile - Diffusion of light, heat dissipation & professional finish. |
SPECIFICATION:
Priced by the metre for a maximum single run length of 5 metres - (If longer run lengths over 5 metres are required refer to part number: LS24PIX-120-CW20).
LED strip is dispatched as one continuous length as per order quantity -Uncut, unless otherwise stated.
Cut to measure with soldered cable tails - Speak with our team to request a bespoke quotation. Alternatively, leave details and measurements for cut to measure LED strip & required length of soldered cable tails in the special instructions box provided at checkout (remember to select the correct cable & solder operation before completing your order).
Pixel chasing LED strip cool white
Inventory Last Updated: Apr 22, 2025